|
Remagen Storm Closet |
Other Shelter |
| Design, Testing &
Certification: |
| Meets FEMA1 & NSSA2
requirements for above ground F5 tornado
shelters |
 |
|
| Tornado shelter design compliance verified by
registered structural engineer |
 |
|
| Shelter tested by FEMA or NSSA approved test
facility |
 |
|
| Door tested for tornado debris missile impacts
(15 lb 2 x 4 board at 100 mph) |
 |
|
| Doors missile impact & pressure tested for
inward & outward swings |
 |
|
| Enclosure walls, roof, & vent openings
tested for tornado missile impacts |
 |
|
| Certificate of installation provided by
manufacturer or dealer |
 |
|
| Local engineer sealed drawings available for
permits or approvals |
 |
|
| Architectural: |
| In-residence shelter |
 |
|
| Above ground shelter |
 |
|
| Shelter floor at same level as residence floor
without any step-over |
 |
|
| 100% non-combustible shelter structure |
 |
|
| Vertical walls, horizontal ceiling, & no
built-in seating |
 |
|
| Inside & outside walls & ceiling
finished to match decor of residence |
 |
|
| Customer-selected door swing and door
location |
 |
|
| Standard height horizontal-swing doors (inward
or outward swing) |
 |
|
| Standard latching and locking hardware meeting
NSSA requirements |
 |
|
| Shelter usable as security vault for
valuables |
 |
|
| Handicapped accessible door |
 |
|
| Shelter available in various lengths and
widths |
 |
|
| Electrical conduit paths provided in walls and
ceiling of shelter |
 |
|
| Accommodates recessed interior electrical
fixtures, switches, & outlets |
 |
|
| Passive ventilation meeting NSSA
requirements |
 |
|
| Construction & Assembly |
| Installed without excavation or heavy lifting
equipment |
 |
|
| Can be assembled or erected inside existing
residence |
 |
|
| Components easily moved by hand to shelter
assembly location in building |
 |
|
| Requires no poured concrete or mortar to
install or erect |
 |
|
| Anchors to typical wire mesh reinforced
concrete slab (4" or thicker) |
 |
|
| Can be assembled by customer using
well-illustrated instructions |
 |
|
| Shipping |
| Standard shelter components stocked by
manufacturer for quick shipping |
 |
|
| Economically shipped anywhere in U. S. by
ground freight carrier |
 |
|
| Shelter freight charges determined before
shelter purchased |
 |
|
| Can be moved to building site by standard
pick-up truck |
 |
|
| Requires no lifting or unloading equipment |
 |
|